The client had this frame fabricated, and we gilded and painted it to match a sample. The mirror was hung above the mantel.
The ground on this mirror had a lot of chips, and there were structural splits. Under all the old touch-ups, we found the original gilding. The majority of the ball, however, needed to be re-gilt.Read More
Reeded mirrors come in and out of the studio for restoration quite often. I was asked, by one client, to make a reproduction reeded mirror, so that it could be custom sized. You can also see the sample in my sample category. The moulding is a traditional 3 1/4″ width, and has 6 reeds. It can be ordered in any custom size, and can be fitted with new, or antiqued glass.Read More
These two mirrors were covered in “radiator paint”, which usually means there is a lot a damage that needed covering up. Once stripped, a surprising amount of original gilding was intact, and the rest was gilded to match.Read More
This convex mirror was coated with gold paint, and the gesso ground was very unstable. We uncovered as much of the original gilding as possible, and after repairing the damage, gilding the rest to match.Read More
All the high points of the carving were loose, or missing. All salvageable areas were secured, and missing chips filled. The mirror was then cleaned, and highlighted with bits of new gold, to give it a little sparkle. Missing pieces of mirror were replaced with antique glass, cut to size.Read More